CSPower: Constant Safe Power For You!
CSPower CH High Discharge AGM UPS Battery
Product Parameters
-------------------------------------------------------------------------------------------------
| CH12-230W |
| Nominal Voltage |
12V (6 cells per unit) |
| Capacity affected by Temperature (10 hour ) |
40ºC |
102% |
| 25ºC |
100% |
| 0ºC |
85% |
| -15ºC |
65% |
| Watts/cell@15min |
230W |
| Capacity @ 25ºC |
10hour rate (6A) |
60Ah |
| 3 hour rate (17A) |
54Ah |
| 1 hour rate (44.2A) |
44.2Ah |
| Internal Resistance |
Full Charged Battery@ 25ºC |
≤6.0mΩ |
| Self-Discharge@25ºC(77°F) Capacity |
after 3 month storage |
90% |
| after 6 month storage |
80% |
| after 12 month storage |
62% |
| Charge (Constant Voltage) @ 25ºC |
Standby Use |
Initial Charging Current Less than 13.8A Voltage 13.6-13.8V |
| Cycle Use |
Initial Charging Current Less than 13.8A Voltage 14.4-14.9V |
| Dimension (mm*mm*mm) |
Length(mm) 229±1 Width(mm) 138±1 Height(mm) 208±1 Total Height(mm) 212±1 |
| Weight (kg) |
19.2±3% |
Product Structure
| Component |
Positive plate |
Negative plate |
Containe r &Cover |
Safety valve |
Terminal |
Separator |
Electrolyte |
Pillar seal |
| Features |
Thick high Sn low Ca grid with Special paste |
Balanced Pb-Ca grid
for improved recombinati on efficiencv |
Fire resistanc e ABS (UL94-V0octional) |
Flame
Si-Rubber and aging resistance |
Female Copper lnsert |
Advanced PVC /AGM
separator for high pressure cell desbm |
Silicon Gel |
Two layers epoxy resin seal |
Φ Positive plate : Thick high Sn low Ca 3D flat pasted plate Φ Negative plate : Balanced Pb-Ca grid and AM with Supper-C addtives
Φ Separator : Imported Amer-sil PVC separator for Gel battery Φ Electrolyte : nano GEL electrolyte
Φ Battery container and cover : ABS for higher temperature Φ Pillar seal : 100% factory tested, proven two layers epoxy resin seal
Φ Relief valve : Complete with integrated flame arrestor
Assembling
Quality control
Projects
Certifications
Φ IEC 60896-21/22 Φ IEC 61427 Φ ISO9001/14001/18001 Φ Eurobat guide, long life Φ BS6290 part 4
Φ GB/T 22473 Φ CE Φ MH63727-UL
Applications
Φ Electric Powered Vehicles Φ Wheel Chairs Φ BTS Stations Φ Medical Equipment Φ Solar and Wind Φ Golf Cars and Buggies
Φ Power Tools Φ Control System Φ UPS systems Φ Emergency systems
Factory
CSpower Battery Tech Co.,Ltd is a professional manufacturer and exporter of environmental friendly Rechargeable Deep Cycle AGM Sealed Lead Acid (SLA) Batteries, Solar GEL Batteries, Front Terminal Battery, High Temperature long life GEL battery, OPzV Battery, Car/Auto Batteries, Telecom Batteries, Lithium batteries and other Solar related products such as Solar inverter, Solar charger controller, Solar panel and so on.
Customers
Customers from 168 countriesIn domestic market, our main customers include China Mobile Limited & Unicom Limited, ZTE Corporation, Delta Electronics Inc, Huawei Technologies, APC, Eaton and so on. And for overseas market, we have exported to over hundreds of countries such as: USA, Brazil, Italy, Greece, Germany, Spain, Russia, Pakistan, Iran, Korea, Thailand, South Africa, Nigeria, Ghana, etc.
Packing
Free OEM/ODMCSPower is competent at ODM and OEM orders according to customers realtime request. Please come to us for your quality battery and solar partner in China today.
FAQ
---------------------------------------------------
Φ Q1. Can your battery be delivered by sea and air?
A: Yes, our batteries can be delivered both by sea and by air. We have MSDS, test report for safe transport as non-dangerous products.
Φ Q2. Can I put my logo on the battery?
A: Yes, you can print your logo on our batteries when you order reach 20ft container quantity. If not, price will be negotiated.
Φ Q3. Can I fast charge my battery?
A: Fast charging is not recommended as ifs harmful for the battery.
Φ Q4. Can I do a partial replacement of my batteries?
A: Partial battery replacement of lead acid battery banks is not recommended.
Φ Q5. How about your delivery time usually?
A: About 7 days for stock products, around 20 days for half container products, 30 days for 20ft full container products.
Φ Q6. What is your warranty time for VRLA battery ?
A: It depends on battery capacity, depth of discharge, and battery usage. Please kindly contact us for accurate information based on detailed requirements.
Φ Q7. Why battery has different capacity at different hour rate?
A: The capacity of a battery, in Ahs, is a dynamic number that is dependent on the discharge current. For example, a battery that is discharged at 10A will give you more capacity than a battery that is discharged at 100A. With the 20-hr rate, the battery is able to deliver more Ahs than with the 2-hr rate because the 20-hr rate uses a lower discharge current than the 2-hr rate.
Φ Q8. What is the shelf life of VRLA battery and how to maintain the battery?
A: The limiting factor of battery's shelf life is the rate of self-discharge which itself is temperature dependent. VRLA batteries will self-discharge less than 3% per month at 77° F (25° C). VRLA batteries should not be stored for more than 6 months at 77° F (25° C) without recharged. If in hot temperature, recharge it every 3 month. When batteries are taken out of long storage, it is recommended to recharge before use.
Φ Q9. Are you a battery manufacturer, and do you produce the plate by yourself ?
A: Yes, we are a professional battery manufacture in Guangdong Province, China. And we produce plates by ourselves.
Φ Q10. What certificate your company have?
A: ISO 9001, ISO 14001, OHSAS 18001, CE, UL, IEC 61427 test report, Patent for gel technology and other Chinese honor.
Φ Q11. How does your factory control the quality?
A: We Adopt ISO 9001 quality system to control the quality. We have Incoming Quality Control (IQC) department to test and confirm raw material meets high quality producing requirements, Production Quality Control (PQC) department contains The first Inspection, In-process quality control, acceptance inspection and full inspection, Outgoing Quality Control (OQC) department confirm no defective batteries come out from the factory.
Product specifications and models
-------------------------------------------------------------------------------------------------
| HIGH RATE DISCHARGE AGM 6/12V BATTERY |
| Model |
Nominal Voltage (V) |
Capacity (Ah) |
Dimension (mm) |
Net Weight |
Gross Weight |
Terminal |
| Length |
Width |
Height |
Total Height |
kgs |
kgs |
| CH6-720W |
6 |
180 |
260 |
180 |
247 |
251 |
30.8 |
31.3 |
M8 |
| CH12-35W |
12 |
8 |
151 |
65 |
95 |
101 |
2.6 |
13.2 |
M6 |
| CH12-55W |
12 |
12 |
151 |
99 |
96 |
102 |
3.8 |
15.7 |
M6 |
| CH12-85W |
12 |
20 |
181 |
77 |
167 |
167 |
6.5 |
27.5 |
M6 |
| CH12-115W |
12 |
28 |
165 |
126 |
174 |
174 |
8.7 |
9.0 |
M6 |
| CH12-145W |
12 |
34 |
196 |
130 |
155 |
167 |
11.0 |
11.3 |
M6 |
| CH12-170W |
12 |
42 |
198 |
166 |
174 |
174 |
13.8 |
14.6 |
M6 |
| CH12-230W |
12 |
60 |
229 |
138 |
208 |
212 |
19.2 |
19.7 |
M6 |
| CH12-290W |
12 |
75 |
350 |
167 |
178 |
178 |
23.0 |
23.5 |
M6 |
| CH12-300W |
12 |
80 |
260 |
169 |
211 |
215 |
25.0 |
25.5 |
M6 |
| CH12-370W |
12 |
95 |
307 |
169 |
211 |
215 |
31.0 |
31.5 |
M6 |
| CH12-420W |
12 |
110 |
331 |
174 |
214 |
219 |
34.0 |
34.5 |
M8 |
| CH12-470W |
12 |
135 |
407 |
174 |
210 |
233 |
39.0 |
39.6 |
M8 |
| CH12-520W |
12 |
150 |
484 |
171 |
241 |
241 |
47.0 |
47.6 |
M8 |
| CH12-540W |
12 |
155 |
328 |
182 |
264 |
271 |
46.0 |
46.5 |
M8 |
| CH12-680W |
12 |
170 |
532 |
206 |
216 |
221 |
58.5 |
59.2 |
M8 |
| CH12-770W |
12 |
220 |
522 |
240 |
219 |
225 |
68.0 |
68.8 |
M8 |
| CH12-800W |
12 |
230 |
520 |
269 |
204 |
209 |
70.0 |
70.8 |
M8 |
| CH12-900W |
12 |
260 |
520 |
268 |
220 |
226 |
79.0 |
79.8 |
M8 |
Solar battery FEATURES AND BENEFITS
Φ Long life and supper stability under high temp. environment Φ Electrolyte immobilized as gel state, no leakage and no stratification.
Φ Supper deep cycle life at high temperature Φ Use supper-C additives:Deep discharge recovery capability
Φ Supper PSOC cycling performance
Free Gift
){kind=link}